www.jcxex.com    415 - 824 - 4110     (fax) 415 - 824 - 0276                                                                                      January 7, 2012 9:52
Lighting Instruments - page two
Please contact us at:  (415) 824-4110  if you can't find what you are looking for.
Frezzi Lights
Frezzi is the world leader for on-camera lighting used by virtually all network news operations, cable, and sports channels for over 70 years. Frezzi continues to expand its family of award winning quartz and HMI lighting tailored to today’s smaller Mini-HD and DV camcorders. The Micro-Fill series provides tungsten or daylight balanced light. The Standard and Dimmer Micro-Fill are balanced at 3200K and provide 5600K with the optional Combo Accessory MRDF. The Dimmer Micro-Fill offers an advanced dimmer circuit for controlling light output providing optimal DV performance without radio interference. Frezzi’s new line of Micro-Fills and Micro-Sun Guns are affordably priced and designed with the same professional features as their big brother counterparts, the award winning Frezzi Mini-Fills and HMI Mini-Sun Guns. Improve your image quality, put a Frezzi on your camera and see the results.
Frezzi Mini-Sun gun kit

Each kit contains the following items: 1) 24 watt Mini-Sun gun w/ choice of connector* (see table below) 1) MFBD Barn doors w/ diffuser 1) MADF 5600K to 3200K conversion filter 1) LS-1A 1.5" Stud with 1/4-20 thread 1) LS-21A 1.5" Stud with Shoe Mount 1) ARCC Compact Case Weight: 4.25 lbs.

Frezzi’s 200W & 400W HMI Lights are engineered for news gathering to produce a wide, smooth, flat optical field of light output that’s unmatched for their size and weight categories.

The 200W HMI rivals most 400W HMI units in the field today while our newest 400W HMI can compete with much larger, heavier and expensive 575W and even some 800W models. This incredible output is a direct result of our computer optimized 5” open face parabolic reflector. Both Frezzi HMI units can operate on either AC or DC compact dimmable ballasts. Unique options are also available for powering the DC ballasts. If you are looking for professional quality, superior output and performance and need to travel lighter to set up quickly with ease, then Frezzi’s 200W & 400W HMI kits are designed for you.

Features & Benefits
• Highest output to size & weight ratio
• Most usable field of light output
• Dimmer controlled AC & DC ballasts with Hot Restrike
• Ruggedized, lightweight, weather resistant design
• Hot restrike, Daylight balanced to 5600K
• Rapid setup and breakdown, easy lightweight travel
 
Lowel Lights
With its high intensity #2 Reflector & Prismatic Glass, the tiny focusable Lowel Pro-light is more efficient than a mini-fresnel of equal wattage. It gives an exquisite even light, with fresnel-like shadow quality, evenly dispersed flood, and a uniform spot with significant barndoor cut.

- Multi-use, tungsten halogen source.
- Focus range-5:1 with 200W FVL lamp.
- Watts: 250 & 125 at 120v,200 at 30v, 100 & 50 at 12v. 230 & 300 at 230v
- Tilting: 160°, adjustable, constant-tension, one-handed, no-yoke tilting

The wide focusing range of the Omni-light makes it a flexible key or back-light. Add diffusion or an umbrella, and it's a soft fill source. Swap the power cord & lamp and it becomes a battery powered, hand-held light. Available with a host of accessories and built for heavy duty long life, the popular Omni is the perfect companion to the Tota.

Multi-use, tungsten halogen source.

Double parabolic, peened reflector provides non-crossover beam for maximum efficiency and gel life.

- Watts: 500, 420 & 300 at 120v, 500 & 300 at 220/240v,250 at 30v, 100 at 12v.
- Focus range - 6:1 with #1 reflector & FTK lamp.
- Quick-change super-spot accessory reflector for exceptionally long throws at all voltages.
- Protective front screen must always be used.

Compact, rugged & versatile, the broad throw Tota-light is a Lowel time honored favorite. It can be used with its umbrella or gel-frame & diffusion as a soft key, fill, or backlight. With its adjustable reflectors, it can be a smooth & even background light, or point it toward the ceiling to raise the ambient (base) light level of a room. Tota is also widely used for photographic copy work. A Multi-use, tungsten halogen source.

Adjustable reflecting doors can illuminate four walls evenly from a corner or compensate for light fall-off on vertical surfaces lit from above or below.

- Watts: 750 & 500 at 120v, 800 at 220/240v.
- 360º constant tension no-yoke tilting. Large, cool knobs.
- Closes compactly for storage & travel.
- Never operate with doors closed beyond notched safety stop.
- Protective front screen must always be used.

The DP is a long time Lowel workhorse. It's a powerful key, backlight or background light. Add an umbrella or diffusion for soft key or fill light, swap to the super-spot reflector for long throws, or customize it with a variety of other accessories. The DP is built for a long multi-use life.

Multi-use, tungsten halogen source.

Peened, parabolic reflector provides non-crossover beam with axial filament orientation for improved shadow pattern and gel life.

- Watts: 1000, 750, 500 at 120v, 1000, 650, & 500 at 220 &240v.
- Focus range - 8:1 with #1 reflector & FEL lamp.
- Quick-change super-spot reflector for exceptionally
long throws at all voltages.
- Large cool knobs.
- Protective front screen must always be used.
Lowel Rifa Lights

Creating beautiful soft key or fill light doesn't have to be strenuous or time consuming. Compact, lightweight, & self-contained, the Rifa eX uses a simple design approach as old as the umbrella to achieve its quick & easy setup and strike capabilities.

Bathe almost anything, from talking heads to table-top stills, in luxurious almost fool-proof soft light. It is the perfect complement to today's compact, light-sensitive, digital cameras & filmstocks. Its ablities are enhanced by the eXchange System accessory lampheads patented bayonet mount, which lets you swap lampheads with a twist of the wrist.

Shooting in daylight? All Rifa eX model's can use our new high CRI daylight fluorescent lamps. Need less light? All 4 models can now go down to 125W AC. No AC current? All 4 can use DC battery power. 

- Dedicated softlight with removable standard tungsten-halogen Rifa eXTM llamphead, centered in collapsible silver aluminized high temperature Nomex® housing.

- State of the art woven glass fabric front diffuser offers exceptional heat resistance. Front diffuser must always be used.

- Easy access to pockets on fabric shell allow clip-on gel attachment.
Rifa 44
Rifa 55
Rifa 66
Rifa 88
 
Mole-Richardson LED and Florescent Lighting
The MoleLED Single puts the power and quality of light from the 12-Pack in the palm of your hand. The Single is a go-anywhere, rig-anywhere lighting solution designed for use in interviews or on news desks; perfect for car rigs or as an Obie Light; and a great solution for lecterns or podiums. The Single will be packaged in kits of Tungsten or Daylight or a combination of both and powered remotely from the 6-Pack Controller. Unlike any other DC powered fixture available today, The Single can be daisy-chained up to three in a row, and remain individually dimmed and switched from the controller.
 Never before has a LED been available to the entertainment industry that is true film-friendly. Designed in collaboration with OSRAM Sylvania and their proprietary Phosphor Dome technology, the MoleLED® provides Tungsten and Daylight white light that parallels both the spectral sensitivity curves of film and the visible spectrum.        The MoleLED® 12-Pack fixtures consist of 12 OSRAM KREIOS® LED circuit boards. Each of those 12 boards contain 20 high output LEDs, for a total of 240 individual sources. Unlike existing LED fixtures, the MoleLED® blends these multiple sources into one, soft, single light source. This single source approach renders the light more attractive to the talent and more familiar to the technicians.

  Molescent BIAX 2 - Type 7371

?Designed for daylight booster when using the quartz tungsten-halogen Dichroic FAY globes. Lightweight and compact. Ideal for exterior fill-light and for hard-to-get-to or confined areas. By directing this lamp through a windshield or window, boosting of daylight can be achieved. Pivoted globe modules permit varied beam coverage. Converged for maximum light intensity of overlapping beams or diverged for a broad, smooth field. Indvidual globe switches are provided for intensity control without changing color temperature. Each globe individually held in a unique globe retainer which mounts directly to the modules. Equally as useful indoors or at night when used with 3200°K quartz globes.

Molescent BIAX 4L - Type 7351

?Designed for daylight booster when using the quartz tungsten-halogen Dichroic FAY globes. Lightweight and compact. Ideal for exterior fill-light and for hard-to-get-to or confined areas. By directing this lamp through a windshield or window, boosting of daylight can be achieved. Pivoted globe modules permit varied beam coverage. Converged for maximum light intensity of overlapping beams or diverged for a broad, smooth field. Indvidual globe switches are provided for intensity control without changing color temperature. Each globe individually held in a unique globe retainer which mounts directly to the modules. Equally as useful indoors or at night when used with 3200°K quartz globes.

Molescent BIAX 4 - Type 7361

?Designed for daylight booster when using the quartz tungsten-halogen Dichroic FAY globes. Lightweight and compact. Ideal for exterior fill-light and for hard-to-get-to or confined areas. By directing this lamp through a windshield or window, boosting of daylight can be achieved. Pivoted globe modules permit varied beam coverage. Converged for maximum light intensity of overlapping beams or diverged for a broad, smooth field. Indvidual globe switches are provided for intensity control without changing color temperature. Each globe individually held in a unique globe retainer which mounts directly to the modules. Equally as useful indoors or at night when used with 3200°K quartz globes.

Molescent BIAX 8L - Type 7411

?Designed for daylight booster when using the quartz tungsten-halogen Dichroic FAY globes. Lightweight and compact. Ideal for exterior fill-light and for hard-to-get-to or confined areas. By directing this lamp through a windshield or window, boosting of daylight can be achieved. Pivoted globe modules permit varied beam coverage. Converged for maximum light intensity of overlapping beams or diverged for a broad, smooth field. Indvidual globe switches are provided for intensity control without changing color temperature. Each globe individually held in a unique globe retainer which mounts directly to the modules. Equally as useful indoors or at night when used with 3200°K quartz globes.
 
Roscoe LitePad LED
LitePad™ is a slim profile, LED light source that delivers soft, even illumination.

Because of its thin profile (only 1/3") and lightweight design, Litepad is ideally suited use in locations where larger conventional luminaries simply cannot fit. Litepad is an exciting new approach to lighting, utilizing sustainable, energy effecient LED technology.

LitePad DL consumes almost 40% less energy than LitePad HO+ while still providing the soft even illumination that has made LitePad so popular among lighting professionals. LitePad DL was designed with event planners, theatrical lighting and architectural designers in mind, offering a more economical option for those applications where the increased brightness of LitePad HO+ is not necessary. Drawing only a few watts of power, LitePad DL is an eco-friendly alternative to conventional light sources. Available in six standard sizes and custom sizes.


LitePad HO+ is a slim profile, edge-lit LED light source. At only 1/3" (a third of an inch) thick, LitePad HO+ is able to fit in places where conventional light sources will not. LitePad HO+ produces a soft quality of light that is easy on the eyes and runs at cool temperatures. Available in eight standard sizes, LitePad HO+ has LEDs on all four sides of the perimeter for maximum brightness. An interior connector provides a solid power connection directly on the LitePad itself. Available in both daylight and tungsten color temperatures, LitePad HO+ can fit a wide variety of applications.
LitePad Axiom is a revolutionary LED light from Rosco specifically designed for filmmakers, videographers and still photographers.

Its steel and aluminum housing is designed not only to protect the light source, but to make a variety of mounting solutions quick and easy. The back of the housing has a universal mounting system allowing the LitePad Axiom to be affixed with brackets to C-Stands or mounted with Velcro, rubber bands or other conventional methods. The housing includes a gel slot for adding Roscolux or Cinegel color or diffusion.

An interior connection in the LitePad unit assures secure electrical connection. The slim profile, low heat and power consumption and outstanding quality of light make LitePad Axiom an excellent choice for professionals everywhere.