
| Lee Color Correction Filters |
FILTER NUMBER |
TUNGSTEN TO DAYLIGHT CONVERSION
|
|||
200 |
Double C.T. Blue (3200K - 26,000K) |
|||
201 |
Full C.T. Blue (3200K - 5700K) |
|||
281 |
3/4 C.T. Blue (3200K - 5000K) |
|||
202 |
1/2 C.T. Blue (3200K - 4300K) |
|||
203 |
1/4 C.T. Blue (3200K - 3600K) |
|||
218 |
1/8 C.T. Blue (3200K - 3400K) |
|||
DAYLIGHT TO TUNGSTEN CONVERSION
|
||||
204 |
1/8 C.T. Blue (3200K - 3400K) |
|||
285 |
3/4 C.T. ORANGE Converts daylight to Tungsten 3600 K mired shift +124 |
|||
205 |
1/2 C.T. ORANGE Converts daylight to Tungsten 3800 K mired shift +109 |
|||
206 |
1/4 C.T. ORANGE Converts daylight to Tungsten 4600 K mired shift +64 |
|||
223 |
1/8 C.T.O. 1/8 C.T.O. |
|||
441 |
FULL C.T. STRAW Converts daylight 6500 K to Tungsten 4300 K with Yellow Bias mired shift + 160 |
|||
442 |
1/2 C.T. STRAW Converts daylight to Tungsten 4300 K with Yellow Bias mired shift + 81 |
|||
443 |
1/4 C.T. STRAW Converts daylight to Tungsten 5100 K with Yellow Bias mired shift + 42 |
|||
444 |
1/8 C.T. STRAW Converts daylight to Tungsten 5700 K with Yellow Bias mired shift + 20 |
|||
DAYLIGHT TO TUNGSTEN CONVERSION WITH NEUTRAL DENSITY
|
||||
207 |
C.T. ORANGE + .3 NEUTRAL DENSITY Converts daylight to 3200K + .3 ND, reduces light 1 stop. |
|||
208 |
C.T. ORANGE + .6 NEUTRAL DENSITY Converts daylight to 3200K + .6 ND, reduces light 2 stops. |
|||
NEUTRAL DENSITY |
||||
298 |
.15 NEUTRAL DENSITY Reduces light 1/2 stop. |
|||
209 |
.3 NEUTRAL DENSITY Reduces light 1 stop. |
|||
210 |
.6 NEUTRAL DENSITY Reduces light 2 stops. |
|||
211 |
.9 NEUTRAL DENSITY Reduces light 3 stops. |
|||
299 |
1.2 NEUTRAL DENSITY Reduces light 4 stops. |
|||
FLUORESCENT CORRECTION SYSTEM
|
||||
241 |
LEE FLUORESCENT 5700 K Converts Tungsten to Fluorscent to be used with LEE Camera FIlter FL 5700-B with Tungsten film |
|||
242 |
LEE FLUORESCENT 4300 K Converts Tungsten to Fluorscent to be used with LEE Camera FIlter FL 4300-B with Tungsten film |
|||
243 |
LEE FLUORESCENT 3600 K Converts Tungsten to Fluorscent to be used with LEE Camera FIlter FL 3600-B with Tungsten film |
|||
219 |
LEE FLUORESCENT GREEN General Tungsten to Fluorescent correction for use when color temperature is unknown. |
|||
PLUS GREEN
|
||||
244 |
LEE PLUS GREEN Provides a Green cast when used on daylight and Tungsten for balancing with Fluorescent. Approximately equivalent to CC30 Green. To be used with Lee Camera Filter FL Series. |
|||
245
|
HALF PLUS GREEN Provides a Green cast when used on daylight and Tungsten for partially balancing with Fluorescent. Approximately equivalent to CC15 Green. To be used with Lee Camera Filter FL Series. |
|||
246
|
QUARTER PLUS GREEN Provides a Green cast when used on daylight and Tungsten for partially balancing with Fluorescent. Approximately equivalent to CC075 Green. To be used with Lee Camera Filter FL Series. |
|||
278
|
EIGHTH PLUS GREEN Provides a Green cast when used on daylight and Tungsten for balancing with Fluorescent. To be used with Lee Camera Filter FL Series. |
|||
MINUS GREEN
|
||||
| 247 | LEE MINUS GREEN Approximately equivalent to a CC30 Magenta camera filter. | |||
| 248 | HALF MINUS GREEN Approximately equivalent to a CC15 Magenta camera filter. | |||
| 249 | QUARTER MINUS GREEN Approximately equivalent to a CC075 Magenta camera filter. | |||
| 279 | EIGHTH MINUS GREEN Provides very slight correction. | |||
| ULTRA VIOLET ABSORPTION | ||||
226 |
LEE U. V. Transmission of less than 50% at 410 nms |
|||
POLARIZER
|
||||
239 |
LEE POLARIZER Reduces glare and reflection. Can be used with a Lee Polarizing camera filter. |
|||
PROTECTION MEDIA
|
||||
269 |
LEE HEAT SHIELD A transparent flexible film designed to extend the life of a filter. The shield should be place between the light source and the filter allowing distance between the shield and the filter. Air should be allowed to circulate freely around the LEE HEAT SHIELD. |
|||
280 |
LEE BLACK FOIL Used to reduce unwanted light spill or to control unwanted light reflection. |
|||
ARC CORRECTION (CARBON - REGULAR)
|
||||
212 |
L.C.T. YELLOW (Y) Reduces Color Temperature of low carbon arcs to 3200 K. |
|||
213 |
WHITE FLAME GREEN Corrects White Flame Carbon arcs by absorbing ultra violet. |
|||
ARC CORRECTION (CARBON - COLOUR BALANCED)
|
||||
230 |
SUPER CORRECTION - L.C.T. YELLOW Converts Yellow Carbon Arc (of low colour temperature) to Tungsten. |
|||
232 |
SUPER CORRECTION - W.F. Green to Tungsten Converts White Flame Arcto 3200
|
|||
ARC CORRECTION (COMPACT SOURCE)
|
||||
236 |
HMI (to Tungsten) Converts HMI to 3200 K, for use with Tungsten Film. |
|||
237 |
CID (to Tungsten) Converts CID to 3200 K, for use with Tungsten Film. |
|||
238 |
CSI (to Tungsten) Converts CSI to 3200 K, for use with Tungsten Film. |